Spit Rotisserie Kit | FlatMate Fire Pit | Accessories

Name: Spit Rotisserie Kit | FlatMate Fire Pit | Accessories
Price: 80 AUD
Availability: InStock

$80.00

GST Included |

Quantity

Take your FlatMate Fire Pit cooking setup to the next level with the FlatMate Spit Rotisserie Kit – a complete bolt-on rotisserie system designed specifically for cooking over your FlatMate Fire Pit.

The kit mounts directly to the FlatMate Fire Pit End Plates, transforming your fire pit into a portable campfire spit for slow-roasting meat over firewood or charcoal.

The battery-powered rotisserie motor automatically turns the spit rod while you cook, helping expose the meat more consistently to the heat while you get on with enjoying camp. With no 240V power connection required, it's well suited to camping, caravanning, 4WD touring and off-grid cooking.

The supplied forks secure your meat to the spit rod, while the locking collar helps keep the rod correctly positioned during operation. The dedicated motor and spit rod brackets mount securely to the FlatMate using the supplied hardware.

Rated for up to 8 kg of meat, there's plenty of capacity for roasting everything from chickens and rolled roasts to larger cuts for a proper feed around the fire.

When it's time to pack up, the kit can be disassembled and stored in the included carry bag, ready for the next trip.

Fire pit one night. BBQ the next. Spit roast on the weekend.

Fires, Feeds and Mates. That's what it's built for.

Type: Battery-Powered Spit Rotisserie Kit
Maximum Load: Up to 8 kg of meat
Power: 2 × D-size batteries (not included)
Spit Rod: Multi-piece removable design
Mounting: Bolt-on FlatMate mounting brackets
Compatibility: Designed for the FlatMate Fire Pit
Fuel: Suitable for cooking over controlled fires using untreated firewood or charcoal
Storage: Carry bag included

The Spit Rotisserie Kit attaches to the End Plates of the FlatMate Fire Pit using dedicated mounting brackets and supplied fasteners.

The motor and spit rod brackets are removable, allowing the rotisserie system to be fitted when required and removed for transport and storage.

The battery-powered design means no 240V mains power is required, making it particularly suited to camping, caravanning and off-grid outdoor cooking.

Maximum load is 8 kg. Always ensure meat is centred and properly balanced on the spit rod and securely held using the supplied forks before switching on the motor.
Included:

2 × FlatMate Mounting Brackets

1 × Spit Rod Bracket

1 × Rotisserie Motor Bracket

1 × Multi-Piece Spit Rod

1 × Battery-Powered Rotisserie Motor

1 × Locking Collar

2 × Rotisserie Forks

1 × Spit Rod Handle

Mounting Fasteners, Wing Nuts & Washers

1 × 8 mm Spanner

1 × Carry Bag

2 × D-size batteries are required and are not included.

FlatMate Fire Pit, food, cooking utensils and other accessories shown are not included unless specifically stated as part of a bundle.

The Spit Rotisserie Kit can also be purchased as part of selected FlatMate Fire Pit Bundles.
Read and follow the provided installation instructions before use.

Fully install the rotisserie kit before lighting the fire. Never install or remove components while the fire pit is hot or in use.

Use only on a flat, stable, fire-resistant surface. Ensure all brackets, fasteners, the spit rod, forks and motor are securely fitted before operation. Do not exceed the maximum load of 8 kg.

Use heat-resistant gloves, keep the motor away from direct flame, excessive heat and water, and supervise the fire and rotisserie at all times. Switch the motor off before removing the spit rod.

Allow all components to cool completely before cleaning or disassembly. Clean the rod, forks and brackets with warm soapy water and dry thoroughly. Wipe the motor with a dry cloth only and never immerse it in water.

Inspect the kit before each use and do not operate it if any components are loose or damaged. Remove the batteries for extended storage and store the clean, dry kit in the supplied carry bag, away from moisture and children.